Specifications for CatchIt Cam Video Cameras

Specs: Helmet Cam Kit | Head Cam Kit | Car Cam Kit

The CatchIt Cam HELMET Camera System Specs:
The CatchIt Cam Camera Lens is manufactured for the purpose in which we sell it for! Our cameras are designed to handle the abuse and lighting conditions that they will be exposed to. Unlike our competitors that sell cheap security cameras that do not work nearly as well as our cameras! Our warranty is a testimate to our confidence in our cameras.

• Small - 1 inch diameter, 2 inches in length
• 480 lines of resolution (Sony 1/3 EX-View CCD)
• Excellent Low light rating = 0.05 lux!
• Super tough weather proof aluminum housing
• Stepless automatic electronic shutter handles very dim room or bright outdoor light
• New image enhancing circuits automatically fine tune image

Patented CatchIt Cam helmet mounting harness:

• Rated BEST helmet camera mount by DirtRider magazine!
• Fully adjustable, Cordura , weather-proof harness
• One size fits most all helmets
• Extremely Secure!
• Fully adjustable!
• Forward or reverse view!

CatchIt Cam SINGLE CONNECTION connecting cable:

• 2 RCA male connectors (for video/audio input jacks)
• 1 small barrel style connector (for battery pack)
• Easy twist connect 8-pin connector

CatchIt Cam Power Supplies:

NiMH (Nickel Metal Hydride) Battery Pack Specifications

• 12 volt DC 1500mah
• 8 Hour approximate run time
• 8 to 10 hour charge time with CatchIt Cam supplied charger
• Dimensions- 3in x 2in x 1in
• Weight- 8oz
• No memory- Can be charged during any part of the cycle without damage

Charger Specifications

• Input- 120v 60hz 0.2A
• Output 12 Volt DC 150ma
• Circuit protected to prevent overcharging
• This charger features a timed C/10 charge rate with automatic switching to C/40 trickle rate after fourteen hours enabling the battery to be left on charge for an indefinite period while maintaining its full charge.

CatchIt Cam Carrying Pouch or Pack:

• Cordura Padded Water resistant camcorder pack (holds battery pack and camcorder)
• Padded Fanny Pack

Our Exclusive One Year Warranty .
Questions? Call us TOLL FREE at 1-877-450-9737
Specs: Helmet Cam Kit | Head Cam Kit | Car Cam Kit - Back to the top.

The CatchIt Cam SNOW-SKI, HAT, and HEADBAND Camera Systems:
Camera Lens, connecting cable, power supplies, and carrying pack:

• See HELMET Cam Kit listed above.
  

CatchIt Cam mounting harness:

• Custom "200 MPH Velcro" (suitable for caps, or hats, etc.)
  
• Fully adjustable, Cordura , weather-proof helmet harness (fits most ski helmets)
  
• CatchIt Cam HEAD-BAND mount
  
• Clip mount (suitable for hats, vests, etc.)
  

Our Exclusive One Year Warranty .
Questions? Call us TOLL FREE at 1-877-450-9737
Specs: Helmet Cam Kit | Head Cam Kit | Car Cam Kit - Back to the top.

The CatchIt Cam IN-CAR, SUSPENSION, and OFF-ROAD Camera Systems Specs:
CatchIt Cam IN-CAR Camera Lens:

• Small - 1 inch diameter, 2 inches in length
  
• 411,000 pixels, 480 lines of resolution (Sony 1/3 High Resolution Color Ex-View CCD)
  
• 94 Degree wide angle lens, (optional views available)
  
• Built-in auto gain control, auto white balance, auto black balance
  
• Electronic auto shutter (1/60-1/100,000 second)
  
• Excellent Low light rating = 0.05 lux! Works great under a car in dark conditions (Superb Suspension viewing camera)
  
• Saturation hue and luminance of color signal are monitored and adjusted hundreds of times per second
  
• Super tough weather proof lightweight aluminum housing
  
• Replaceable lens cap
  

CatchIt Cam mounting bracket:

• Light-weight fully adjustable roll-bar mount
  
• Anti-vibration resistance built in
  
• Available for all size roll-bars (square or round)
  

CatchIt Cam ONE-SNAP connecting cable:

• 2 RCA male connectors (for video/audio input jacks)
  
• 1 barrel style connector (for battery pack)
  
• Easy connect 8-pin connector (for camera lens)
  

CatchIt Cam Power Supplies:

NiMH (Nickel Metal Hydride) Battery Pack Specifications

• 12 volt DC 1500mah
• 8 Hour approximate run time
• 8 to 10 hour charge time with CatchIt Cam supplied charger
• Dimensions- 3in x 2in x 1in
• Weight- 8oz
• No memory- Can be charged during any part of the cycle without damage

Charger Specifications

• Input- 120v 60hz 0.2A
• Output 12 Volt DC 150ma
• Circuit protected to prevent overcharging
• This charger features a timed C/10 charge rate with automatic switching to C/40 trickle rate after fourteen hours enabling the battery to be left on charge for an indefinite period while maintaining its full charge.

6 month warranty .
Questions? Call us TOLL FREE at 1-877-450-9737
Specs: Helmet Cam Kit | Head Cam Kit | Car Cam Kit - Back to the top.

Questions? Email us at: sales@catchitcam.com
or call TOLL FREE 1-877-450-9737